[Dev] build error on ath9k-htc-firmware

[taro-k at movasense.com]

Hi, I have fixed a bit of codes for cmake
for this build problem.
Could you tell me how I can push git commit?
(It seems I need account, right?)

best regards.  Taro

On 02/18/2014 06:14 PM, taro-k at movasense.com wrote:
> Dear Mono, I have revised the following referring your help.
> I hope it is help for immigrants like me, thx. Taro
> https://wiki.parabolagnulinux.org/Migration_from_Arch
>
> On 02/18/2014 12:07 PM, taro-k at movasense.com wrote:
>> Dear Mono,
>>
>> thanks lot for your help, now the build is successful!  Taro
>>
>> p.s.
>> Originally, I referred the following.
>> http://comments.gmane.org/gmane.linux.distributions.parabola.devel/1701
>>
>> On 02/18/2014 04:22 AM, Mono wrote:
>>> Hallo Taro,
>>>
>>> I didnt look into this for some time. I guess(!) you used what fauno
>>> suggested:
>>>> mkdir -p $srcdir/bin
>>>> ln -s /usr/bin/xtensa-unknown-elf-as $srcdir/bin/as
>>>> export PATH=$srcdir/bin:$PATH
>>> I just tried that and also added
>>> ln -s /usr/bin/xtensa-unknown-elf-objcopy $srcdir/bin/objcopy
>>>
>>> the result looks exactly what you got. Well, it seems that the correct
>>> as (aka xtensa-unknown-elf-as) is used, but still it does not find
>>> xtensa-unknown-elf-objcopy. So here is the very ugly alternative
>>> approach:
>>>
>>> # mv /usr/bin/objcopy /usr/bin/objcopy.away
>>> # ln -s /usr/bin/xtensa-unknown-elf-objcopy /usr/bin/objcopy
>>>
>>> then build the package with makepkg
>>> when finished revert the ugly changes
>>>
>>> # rm /usr/bin/objcopy
>>> # mv /usr/bin/objcopy.away /usr/bin/objcopy
>>>
>>> the same could be done to as and xtensa-unknown-elf-as, or use the
>>> approach posted by fauno.
>>>
>>> hope it helps
>>> best regards
>>> Mono
>>>
>>>
>>> On Sat, Feb 15, 2014 at 07:34:55AM +0000, Taro wrote:
>>>> Hi Mono,
>>>> your comment is also good help for me
>>>> to build ath9k-htc-firmware.
>>>> However, I got the following error then.
>>>> Can you help again?  best regards.  Taro
>>>>
>>>> make[2]: Entering directory
>>>> '/mnt/tmp/taro-tmp/abslibre/libre/ath9k-htc-firmware
>>>> /src/open-ath9k-htc-firmware-1.3.2/target_firmware/build/k2'
>>>> [ 93%] Generating fw.elf
>>>> [ 96%] Generating fw.bin
>>>> /usr/bin/objcopy: Unable to recognise the format of the input file
>>>> `fw.elf'
>>>> /usr/bin/objcopy: --change-section-vma .text+0xffffffffffc00000 never
>>>> used
>>>> /usr/bin/objcopy: --change-section-lma .text+0xffffffffffc00000 never
>>>> used
>>>> CMakeFiles/gen-firmware.dir/build.make:59: recipe for target 'fw.bin'
>>>> failed
>>>> make[2]: *** [fw.bin] Error 1
>>>> make[2]: Leaving directory
>>>> '/mnt/tmp/taro-tmp/abslibre/libre/ath9k-htc-firmware/
>>>>
>>>>
>>>> _______________________________________________
>>>> Dev mailing list
>>>> Dev at lists.parabolagnulinux.org
>>>> https://lists.parabolagnulinux.org/mailman/listinfo/dev