[Dev] build error on ath9k-htc-firmware

[taro-k at movasense.com]

Dear Mono, I have revised the following referring your help.
I hope it is help for immigrants like me, thx. Taro
https://wiki.parabolagnulinux.org/Migration_from_Arch

On 02/18/2014 12:07 PM, taro-k at movasense.com wrote:
> Dear Mono,
>
> thanks lot for your help, now the build is successful!  Taro
>
> p.s.
> Originally, I referred the following.
> http://comments.gmane.org/gmane.linux.distributions.parabola.devel/1701
>
> On 02/18/2014 04:22 AM, Mono wrote:
>> Hallo Taro,
>>
>> I didnt look into this for some time. I guess(!) you used what fauno
>> suggested:
>>> mkdir -p $srcdir/bin
>>> ln -s /usr/bin/xtensa-unknown-elf-as $srcdir/bin/as
>>> export PATH=$srcdir/bin:$PATH
>> I just tried that and also added
>> ln -s /usr/bin/xtensa-unknown-elf-objcopy $srcdir/bin/objcopy
>>
>> the result looks exactly what you got. Well, it seems that the correct
>> as (aka xtensa-unknown-elf-as) is used, but still it does not find
>> xtensa-unknown-elf-objcopy. So here is the very ugly alternative
>> approach:
>>
>> # mv /usr/bin/objcopy /usr/bin/objcopy.away
>> # ln -s /usr/bin/xtensa-unknown-elf-objcopy /usr/bin/objcopy
>>
>> then build the package with makepkg
>> when finished revert the ugly changes
>>
>> # rm /usr/bin/objcopy
>> # mv /usr/bin/objcopy.away /usr/bin/objcopy
>>
>> the same could be done to as and xtensa-unknown-elf-as, or use the
>> approach posted by fauno.
>>
>> hope it helps
>> best regards
>> Mono
>>
>>
>> On Sat, Feb 15, 2014 at 07:34:55AM +0000, Taro wrote:
>>> Hi Mono,
>>> your comment is also good help for me
>>> to build ath9k-htc-firmware.
>>> However, I got the following error then.
>>> Can you help again?  best regards.  Taro
>>>
>>> make[2]: Entering directory
>>> '/mnt/tmp/taro-tmp/abslibre/libre/ath9k-htc-firmware
>>> /src/open-ath9k-htc-firmware-1.3.2/target_firmware/build/k2'
>>> [ 93%] Generating fw.elf
>>> [ 96%] Generating fw.bin
>>> /usr/bin/objcopy: Unable to recognise the format of the input file
>>> `fw.elf'
>>> /usr/bin/objcopy: --change-section-vma .text+0xffffffffffc00000 never
>>> used
>>> /usr/bin/objcopy: --change-section-lma .text+0xffffffffffc00000 never
>>> used
>>> CMakeFiles/gen-firmware.dir/build.make:59: recipe for target 'fw.bin'
>>> failed
>>> make[2]: *** [fw.bin] Error 1
>>> make[2]: Leaving directory
>>> '/mnt/tmp/taro-tmp/abslibre/libre/ath9k-htc-firmware/
>>>
>>>
>>> _______________________________________________
>>> Dev mailing list
>>> Dev at lists.parabolagnulinux.org
>>> https://lists.parabolagnulinux.org/mailman/listinfo/dev