From hironori.ueno at protonmail.com  Tue Feb  8 01:08:19 2022
From: hironori.ueno at protonmail.com (hironori.ueno)
Date: Tue, 08 Feb 2022 01:08:19 +0000
Subject: [Assist] About torrent files and wiki editing
Message-ID: <WfBRo_6DeSmg9I92gYRDzcohtk26dYgDHmw7L1t7HE2N7FcUUn9cMILMqFRVsvfcPM3fWxbZ0COmaP97XCAQ9HkFpsN478q9CwURJpW05GE=@protonmail.com>

Hi

(I'm sorry if my English is hard to understand.)

A few days ago, for the first time, I installed Parabola on
my computer and built an environment for my work. I would like
to thank everyone in the Parabola community.

I have confirmed that the torrent link is 403 on the Parabola
GNU/Linux ISO download page. I tried Magnet link, but it didn't
find Tracker either. Is this just my problem?

If Parabola doesn't currently support torrents for ISO images,
I don't think it's good to have the links left, but it seems that
 the Wiki can only be modified by a specific editor.

In addition, I am a native Japanese speaker and have confirmed
that there is a lack of Japanese documentation on the Wiki.
Is there anything I can do to help add those documents?

Best regards

From bill-auger at peers.community  Tue Feb  8 14:25:58 2022
From: bill-auger at peers.community (bill-auger)
Date: Tue, 8 Feb 2022 09:25:58 -0500
Subject: [Assist] About torrent files and wiki editing
In-Reply-To: <WfBRo_6DeSmg9I92gYRDzcohtk26dYgDHmw7L1t7HE2N7FcUUn9cMILMqFRVsvfcPM3fWxbZ0COmaP97XCAQ9HkFpsN478q9CwURJpW05GE=@protonmail.com>
References: <WfBRo_6DeSmg9I92gYRDzcohtk26dYgDHmw7L1t7HE2N7FcUUn9cMILMqFRVsvfcPM3fWxbZ0COmaP97XCAQ9HkFpsN478q9CwURJpW05GE=@protonmail.com>
Message-ID: <20220208092558.10dfcb51@parabola.localdomain>

the downloads page is special; but most wiki pages can be crated
and edited by anyone - are you registered in the parabola wiki
already?

the most important pages to keep accurate are the Main page and
the install guide - the downloads page may be replaced soon

From hironori.ueno at protonmail.com  Tue Feb  8 18:47:07 2022
From: hironori.ueno at protonmail.com (hironori.ueno)
Date: Tue, 08 Feb 2022 18:47:07 +0000
Subject: [Assist] About torrent files and wiki editing
In-Reply-To: <20220208092558.10dfcb51@parabola.localdomain>
References: <WfBRo_6DeSmg9I92gYRDzcohtk26dYgDHmw7L1t7HE2N7FcUUn9cMILMqFRVsvfcPM3fWxbZ0COmaP97XCAQ9HkFpsN478q9CwURJpW05GE=@protonmail.com>
 <20220208092558.10dfcb51@parabola.localdomain>
Message-ID: <NsUGsoVAckWb2bu4RF9X3uAJj9VhDWQ8E3ZQwQswbIlh-c1xf16KUk2J89jKSzZoitHvsZpOvzlYygexOxZ-7OQLGzK7qzzg713Li3D8khY=@protonmail.com>

Hi, Thank you for your help.

On Tuesday, February 8th, 2022 at 11:25 PM, bill-auger <bill-auger at peers.community> wrote:

> the downloads page is special; but most wiki pages can be crated
> and edited by anyone - are you registered in the parabola wiki
> already?

I was able to create a forum(package issue) account.
However, I can't find the page to register WIKI account.
It looks like there is no registration link on the WIKI login page.
(https://wiki.parabola.nu/index.php?title=Special:UserLogin&returnto=Main+Page)

>From this, I thought that I could not edit the article without permission.
If I have overlooked something, I would appreciate any advice.

> the most important pages to keep accurate are the Main page and
> the install guide - the downloads page may be replaced soon

got it. thank you.

From bill-auger at peers.community  Tue Feb  8 19:10:35 2022
From: bill-auger at peers.community (bill-auger)
Date: Tue, 8 Feb 2022 14:10:35 -0500
Subject: [Assist] About torrent files and wiki editing
In-Reply-To: <NsUGsoVAckWb2bu4RF9X3uAJj9VhDWQ8E3ZQwQswbIlh-c1xf16KUk2J89jKSzZoitHvsZpOvzlYygexOxZ-7OQLGzK7qzzg713Li3D8khY=@protonmail.com>
References: <WfBRo_6DeSmg9I92gYRDzcohtk26dYgDHmw7L1t7HE2N7FcUUn9cMILMqFRVsvfcPM3fWxbZ0COmaP97XCAQ9HkFpsN478q9CwURJpW05GE=@protonmail.com>
 <20220208092558.10dfcb51@parabola.localdomain>
 <NsUGsoVAckWb2bu4RF9X3uAJj9VhDWQ8E3ZQwQswbIlh-c1xf16KUk2J89jKSzZoitHvsZpOvzlYygexOxZ-7OQLGzK7qzzg713Li3D8khY=@protonmail.com>
Message-ID: <20220208141035.40ff775a@parabola.localdomain>

wiki registrations are done manually - just tell me the nickname
you would like to use on the wiki

From hironori.ueno at protonmail.com  Tue Feb  8 19:25:49 2022
From: hironori.ueno at protonmail.com (hironori.ueno)
Date: Tue, 08 Feb 2022 19:25:49 +0000
Subject: [Assist] About torrent files and wiki editing
In-Reply-To: <20220208141035.40ff775a@parabola.localdomain>
References: <WfBRo_6DeSmg9I92gYRDzcohtk26dYgDHmw7L1t7HE2N7FcUUn9cMILMqFRVsvfcPM3fWxbZ0COmaP97XCAQ9HkFpsN478q9CwURJpW05GE=@protonmail.com>
 <20220208092558.10dfcb51@parabola.localdomain>
 <NsUGsoVAckWb2bu4RF9X3uAJj9VhDWQ8E3ZQwQswbIlh-c1xf16KUk2J89jKSzZoitHvsZpOvzlYygexOxZ-7OQLGzK7qzzg713Li3D8khY=@protonmail.com>
 <20220208141035.40ff775a@parabola.localdomain>
Message-ID: <uCxVlDSEugN-ljonUaWGsq8qcmNEGvxaDyIe5OVbZ_2ExuONjvhRgAb50hTWPY5IUVflrPKfbRk_L27h52XFPAC6FQXSXEhI9_JEL-VGEGo=@protonmail.com>

On Wednesday, February 9th, 2022 at 4:10 AM, bill-auger <bill-auger at peers.community> wrote:

> wiki registrations are done manually - just tell me the nickname
> you would like to use on the wiki

I see. understood.
I want to use "hironori" as my nickname.


From bill-auger at peers.community  Tue Feb  8 19:47:00 2022
From: bill-auger at peers.community (bill-auger)
Date: Tue, 8 Feb 2022 14:47:00 -0500
Subject: [Assist] About torrent files and wiki editing
In-Reply-To: <uCxVlDSEugN-ljonUaWGsq8qcmNEGvxaDyIe5OVbZ_2ExuONjvhRgAb50hTWPY5IUVflrPKfbRk_L27h52XFPAC6FQXSXEhI9_JEL-VGEGo=@protonmail.com>
References: <WfBRo_6DeSmg9I92gYRDzcohtk26dYgDHmw7L1t7HE2N7FcUUn9cMILMqFRVsvfcPM3fWxbZ0COmaP97XCAQ9HkFpsN478q9CwURJpW05GE=@protonmail.com>
 <20220208092558.10dfcb51@parabola.localdomain>
 <NsUGsoVAckWb2bu4RF9X3uAJj9VhDWQ8E3ZQwQswbIlh-c1xf16KUk2J89jKSzZoitHvsZpOvzlYygexOxZ-7OQLGzK7qzzg713Li3D8khY=@protonmail.com>
 <20220208141035.40ff775a@parabola.localdomain>
 <uCxVlDSEugN-ljonUaWGsq8qcmNEGvxaDyIe5OVbZ_2ExuONjvhRgAb50hTWPY5IUVflrPKfbRk_L27h52XFPAC6FQXSXEhI9_JEL-VGEGo=@protonmail.com>
Message-ID: <20220208144700.6690557a@parabola.localdomain>

ok you should get an email from the wiki soon - thanks for the
help :)

From hironori.ueno at protonmail.com  Tue Feb  8 19:58:33 2022
From: hironori.ueno at protonmail.com (hironori.ueno)
Date: Tue, 08 Feb 2022 19:58:33 +0000
Subject: [Assist] About torrent files and wiki editing
In-Reply-To: <20220208144700.6690557a@parabola.localdomain>
References: <WfBRo_6DeSmg9I92gYRDzcohtk26dYgDHmw7L1t7HE2N7FcUUn9cMILMqFRVsvfcPM3fWxbZ0COmaP97XCAQ9HkFpsN478q9CwURJpW05GE=@protonmail.com>
 <20220208092558.10dfcb51@parabola.localdomain>
 <NsUGsoVAckWb2bu4RF9X3uAJj9VhDWQ8E3ZQwQswbIlh-c1xf16KUk2J89jKSzZoitHvsZpOvzlYygexOxZ-7OQLGzK7qzzg713Li3D8khY=@protonmail.com>
 <20220208141035.40ff775a@parabola.localdomain>
 <uCxVlDSEugN-ljonUaWGsq8qcmNEGvxaDyIe5OVbZ_2ExuONjvhRgAb50hTWPY5IUVflrPKfbRk_L27h52XFPAC6FQXSXEhI9_JEL-VGEGo=@protonmail.com>
 <20220208144700.6690557a@parabola.localdomain>
Message-ID: <A83aRV7UIbw5hpLkWrhsF9_Joa770th1AW3rbnavi5o9hC3zrwuIUssY7_oPPIRl9hkMf1x0XX5o3OyNQ9KGFU7crIs6NMyYboAZT0-W6ks=@protonmail.com>

I received an email with my ID and password
and was able to log in.

thanks!

Sent with ProtonMail Secure Email.

------- Original Message -------

On Wednesday, February 9th, 2022 at 4:47 AM, bill-auger <bill-auger at peers.community> wrote:

> ok you should get an email from the wiki soon - thanks for the
> help :)

From hironori.ueno at protonmail.com  Mon Feb 28 13:36:01 2022
From: hironori.ueno at protonmail.com (hironori.ueno)
Date: Mon, 28 Feb 2022 13:36:01 +0000
Subject: [Assist] How can I downgrade GCC?
Message-ID: <APN6LkjaavLSJCsdhtC-hScpa0XDV5jXwPo_K-bajVW_M3-eDqvVKlb9SSobTqSvoQmHEziZ6m1zlXDJBowl7o5z_bWo0Rf0Tp7Mm9-G-TM=@protonmail.com>

Hi,

I have a problem and please let me know if there is a solution.
I tried to build a module for dkms and got the following warning:
----------------------------
warning: the compiler differs from the one used to build the kernel
The kernel was built by: gcc (GCC) 11.1.0
You are using: gcc (GCC) 11.2.0
----------------------------

I thought it was a problem caused by updating GCC and tried to
downgrade to get GCC back from 11.2.0 to 11.1.0.
For the downgrade, I used the "downgrade" provided by AUR.

----------------------------
$ sudo downgrade gcc gcc-libs
----------------------------

However, running this command causes a conflict with binutils.

----------------------------
error: failed to commit transaction (conflicting files)
/usr/include/libiberty/ansidecl.h exists in both 'binutils' and 'gcc'
/usr/include/libiberty/demangle.h exists in both 'binutils' and 'gcc'
/usr/include/libiberty/dyn-string.h exists in both 'binutils' and 'gcc'
/usr/include/libiberty/fibheap.h exists in both 'binutils' and 'gcc'
/usr/include/libiberty/floatformat.h exists in both 'binutils' and 'gcc'
/usr/include/libiberty/hashtab.h exists in both 'binutils' and 'gcc'
/usr/include/libiberty/libiberty.h exists in both 'binutils' and 'gcc'
/usr/include/libiberty/objalloc.h exists in both 'binutils' and 'gcc'
/usr/include/libiberty/partition.h exists in both 'binutils' and 'gcc'
/usr/include/libiberty/safe-ctype.h exists in both 'binutils' and 'gcc'
/usr/include/libiberty/sort.h exists in both 'binutils' and 'gcc'
/usr/include/libiberty/splay-tree.h exists in both 'binutils' and 'gcc'
/usr/include/libiberty/timeval-utils.h exists in both 'binutils' and 'gcc'
/usr/lib/libiberty.a exists in both 'binutils' and 'gcc'
----------------------------

Has anyone had a similar problem?
thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.parabola.nu/pipermail/assist/attachments/20220228/e1aa8027/attachment.htm>

From edgar at openmail.cc  Mon Feb 28 15:46:59 2022
From: edgar at openmail.cc (edgar at openmail.cc)
Date: Mon, 28 Feb 2022 15:46:59 +0000
Subject: [Assist] How can I downgrade GCC?
In-Reply-To: <APN6LkjaavLSJCsdhtC-hScpa0XDV5jXwPo_K-bajVW_M3-eDqvVKlb9SSobTqSvoQmHEziZ6m1zlXDJBowl7o5z_bWo0Rf0Tp7Mm9-G-TM=@protonmail.com>
References: <APN6LkjaavLSJCsdhtC-hScpa0XDV5jXwPo_K-bajVW_M3-eDqvVKlb9SSobTqSvoQmHEziZ6m1zlXDJBowl7o5z_bWo0Rf0Tp7Mm9-G-TM=@protonmail.com>
Message-ID: <a1129df71ec7f382e6755eb1c1253ca1@openmail.cc>

On 2022-02-28 13:36, hironori.ueno wrote:
> Hi,
> 
> I have a problem and please let me know if there is a solution.
> I tried to build a module for dkms and got the following warning:
> ----------------------------
> warning: the compiler differs from the one used to build the kernel
> The kernel was built by: gcc (GCC) 11.1.0
> You are using: gcc (GCC) 11.2.0
> ----------------------------
> 
> I thought it was a problem caused by updating GCC and tried to
> downgrade to get GCC back from 11.2.0 to 11.1.0.
> For the downgrade, I used the "downgrade" provided by AUR.
> 
> ----------------------------
> $ sudo downgrade gcc gcc-libs
> ----------------------------
Without being an expert, my experience is that downgrading anything 
related to libc means to downgrade the whole system or building a lot of 
packages from scratch. I imagine that a similar situation arises with 
GCC.

Also, sometimes, warnings are innocuous (you can disregard them). In 
your case, I would try to compile and see if it works.

-------------------------------------------------
This free account was provided by VFEmail.net - report spam to abuse at vfemail.net
 
ONLY AT VFEmail! - Use our Metadata Mitigator to keep your email out of the NSA's hands!
$24.95 ONETIME Lifetime accounts with Privacy Features!  
15GB disk! No bandwidth quotas!
Commercial and Bulk Mail Options!  

From GNUtoo at cyberdimension.org  Mon Feb 28 22:20:52 2022
From: GNUtoo at cyberdimension.org (Denis 'GNUtoo' Carikli)
Date: Mon, 28 Feb 2022 23:20:52 +0100
Subject: [Assist] How can I downgrade GCC?
In-Reply-To: <APN6LkjaavLSJCsdhtC-hScpa0XDV5jXwPo_K-bajVW_M3-eDqvVKlb9SSobTqSvoQmHEziZ6m1zlXDJBowl7o5z_bWo0Rf0Tp7Mm9-G-TM=@protonmail.com>
References: <APN6LkjaavLSJCsdhtC-hScpa0XDV5jXwPo_K-bajVW_M3-eDqvVKlb9SSobTqSvoQmHEziZ6m1zlXDJBowl7o5z_bWo0Rf0Tp7Mm9-G-TM=@protonmail.com>
Message-ID: <20220228232052.0bd9e02e@primarylaptop.localdomain>

On Mon, 28 Feb 2022 13:36:01 +0000
"hironori.ueno" <hironori.ueno at protonmail.com> wrote:

> Hi,
Hi,

> I have a problem and please let me know if there is a solution.
> I tried to build a module for dkms and got the following warning:
> ----------------------------
> warning: the compiler differs from the one used to build the kernel
> The kernel was built by: gcc (GCC) 11.1.0
> You are using: gcc (GCC) 11.2.0
> ----------------------------
This is probably because we use GCC plugins for building the kernel:
> $ grep CONFIG_GCC_PLUGINS abslibre/libre/linux-libre-*/config.*
> abslibre/libre/linux-libre-64/config.aarch64:CONFIG_GCC_PLUGINS=y
> abslibre/libre/linux-libre-64/config.armv7h:CONFIG_GCC_PLUGINS=y
> abslibre/libre/linux-libre-64/config.i686:CONFIG_GCC_PLUGINS=y
> abslibre/libre/linux-libre-64/config.x86_64:CONFIG_GCC_PLUGINS=y
> abslibre/libre/linux-libre-lts/config.armv7h:CONFIG_GCC_PLUGINS=y
> abslibre/libre/linux-libre-lts/config.i686:CONFIG_GCC_PLUGINS=y
> abslibre/libre/linux-libre-lts/config.x86_64:CONFIG_GCC_PLUGINS=y
> abslibre/libre/linux-libre-pck/config.armv7h:CONFIG_GCC_PLUGINS=y
> abslibre/libre/linux-libre-pck/config.i686:CONFIG_GCC_PLUGINS=y
> abslibre/libre/linux-libre-pck/config.x86_64:CONFIG_GCC_PLUGINS=y

The solution is probably to have Parabola developers rebuild the kernels
with newer GCCs here.

What kernel and Parabola version (i686, armv7h, x86_64) do you use?

Denis.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 833 bytes
Desc: OpenPGP digital signature
URL: <https://lists.parabola.nu/pipermail/assist/attachments/20220228/5ed35600/attachment.sig>