[Assist] Trouble with connecting eap-peap wpa enteprise network

[Unknown]

I cant connect my university eduroam network with parabola.I
reinstalled a fresh one and it has no problem.
my wpa_supplicant log is

wpa_supplicant -ddd -D nl80211 -B -i wlp2s0
-c/etc/wpa_supplicant/wpa_supplicant.conf.bak wpa_supplicant v2.2
Successfully initialized wpa_supplicant
Initializing interface 'wlp2s0' conf
'/etc/wpa_supplicant/wpa_supplicant.conf.bak' driver 'nl80211'
ctrl_interface 'N/A' bridge 'N/A' Configuration file
'/etc/wpa_supplicant/wpa_supplicant.conf.bak' ->
'/etc/wpa_supplicant/wpa_supplicant.conf.bak' Reading configuration
file '/etc/wpa_supplicant/wpa_supplicant.conf.bak'
ctrl_interface='/var/run/wpa_supplicant' Line: 3 - start of a new
network block ssid - hexdump_ascii(len=7): 65 64 75 72 6f 61
6d                              eduroam key_mgmt: 0x1 eap methods -
hexdump(len=16): 00 00 00 00 19 00 00 00 00 00 00 00 00 00 00 00
identity - hexdump_ascii(len=18): 6b 6f 79 62 61 73 69 40 69 74 75 2e
65 64 75 2e   koybasi at itu.edu. 74
72                                             tr password -
hexdump_ascii(len=10): [REMOVED] phase2 - hexdump_ascii(len=13):
     61 75 74 68 3d 4d 53 43 48 41 50 56 32            auth=MSCHAPV2   
priority=10 (0xa)
Priority group 10
   id=0 ssid='eduroam'
rfkill: initial event: idx=0 type=1 op=0 soft=0 hard=0
rfkill: initial event: idx=1 type=1 op=0 soft=0 hard=0
nl80211: Supported cipher 00-0f-ac:1
nl80211: Supported cipher 00-0f-ac:5
nl80211: Supported cipher 00-0f-ac:2
nl80211: Supported cipher 00-0f-ac:4
nl80211: Using driver-based off-channel TX
nl80211: interface wlp2s0 in phy phy0
nl80211: Set mode ifindex 3 iftype 2 (STATION)
nl80211: Subscribe to mgmt frames with non-AP handle 0x152fad0
nl80211: Register frame type=0xd0 nl_handle=0x152fad0 match=040a
nl80211: Register frame type=0xd0 nl_handle=0x152fad0 match=040b
nl80211: Register frame type=0xd0 nl_handle=0x152fad0 match=040c
nl80211: Register frame type=0xd0 nl_handle=0x152fad0 match=040d
nl80211: Register frame type=0xd0 nl_handle=0x152fad0 match=090a
nl80211: Register frame type=0xd0 nl_handle=0x152fad0 match=090b
nl80211: Register frame type=0xd0 nl_handle=0x152fad0 match=090c
nl80211: Register frame type=0xd0 nl_handle=0x152fad0 match=090d
nl80211: Register frame type=0xd0 nl_handle=0x152fad0 match=0409506f9a09
nl80211: Register frame type=0xd0 nl_handle=0x152fad0 match=7f506f9a09
nl80211: Register frame type=0xd0 nl_handle=0x152fad0 match=0801
nl80211: Register frame type=0xd0 nl_handle=0x152fad0 match=06
nl80211: Register frame type=0xd0 nl_handle=0x152fad0 match=0a07
nl80211: Register frame type=0xd0 nl_handle=0x152fad0 match=0a11
netlink: Operstate: ifindex=3 linkmode=1 (userspace-control),
operstate=5 (IF_OPER_DORMANT) nl80211: driver param='(null)'
Add interface wlp2s0 to a new radio phy0
nl80211: Regulatory information - country=00
nl80211: 2402-2472 @ 92 MHz 20 mBm
nl80211: 2457-2482 @ 92 MHz 20 mBm (no IR)
nl80211: 2474-2494 @ 20 MHz 20 mBm (no OFDM) (no IR)
nl80211: 5170-5250 @ 160 MHz 20 mBm (no IR)
nl80211: 5250-5330 @ 160 MHz 20 mBm (DFS) (no IR)
nl80211: 5490-5730 @ 160 MHz 20 mBm (DFS) (no IR)
nl80211: 5735-5835 @ 80 MHz 20 mBm (no IR)
nl80211: 57240-63720 @ 2160 MHz 0 mBm
nl80211: Added 802.11b mode based on 802.11g information
wlp2s0: Own MAC address: 02:26:c7:4f:e8:46
wpa_driver_nl80211_set_key: ifindex=3 (wlp2s0) alg=0 addr=(nil)
key_idx=0 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key:
ifindex=3 (wlp2s0) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0
key_len=0 wpa_driver_nl80211_set_key: ifindex=3 (wlp2s0) alg=0
addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 (wlp2s0) alg=0 addr=(nil)
key_idx=3 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key:
ifindex=3 (wlp2s0) alg=0 addr=(nil) key_idx=4 set_tx=0 seq_len=0
key_len=0 wpa_driver_nl80211_set_key: ifindex=3 (wlp2s0) alg=0
addr=(nil) key_idx=5 set_tx=0 seq_len=0 key_len=0 wlp2s0: RSN: flushing
PMKID list in the driver nl80211: Flush PMKIDs wlp2s0: Setting scan
request: 0.100000 sec TDLS: TDLS operation not supported by driver
TDLS: Driver uses internal link setup wlp2s0: WPS: UUID based on MAC
address: e920c723-fe4e-57ac-814a-87eeb4a8f9ae 
EAPOL: SUPP_PAE entering
state DISCONNECTED 
EAPOL: Supplicant port status: Unauthorized nl80211:
Skip set_supp_port(unauthorized) while not associated EAPOL: KEY_RX
entering state NO_KEY_RECEIVE EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
wlp2s0: Added interface wlp2s0
wlp2s0: State: DISCONNECTED -> DISCONNECTED
nl80211: Set wlp2s0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5
(IF_OPER_DORMANT) Daemonize..